top of page
Writer's pictureNick

SYP4506 grain popper was tested using three raw materials from Czech buyers.

The three raw materials were short rice, long rice and spelt.

SYP4506 Grain Popper Test by Rice & Spelt
SYP4506 Grain Popper Test

Cake type and chip type were tested

Below is a test video.


No. 1 Cake Type - Long rice

The test result was good.

But more material supply required for bigger thickness.

No. 2 Cake Type - Short rice

The test result was good.

Thicker cake can be produced.


No. 3 Cake Type - Spelt

The test result was not bad but it was stick on the mold.

So, non-stick agent need to be mixed.


No. 4 Cake Type - Short rice

The test result was good.


No. 5 Cake Type - Spelt + Short rice + Long rice

Rice is mixed around 50%. Popping was good.


No. 6 Chip Type - Long rice

The test result was good.

But 100% long rice(Brown) is easy to break than white rice.


No. 7 Chip Type - Short rice

The test result was good. It’s not easy to break.


No. 8 Chip Type - Spelt

The test result wasn’t good.

It’s better to mix with other grains such as rice.


No. 9 Chip Type - Spelt + Short rice

The test result was better than No. 8

It’s mixed with short rice


No.10 Chip Type - Spelt + Short rice + Long rice

The test result was good.

But 100% long rice(Brown) is easy to break than white rice.

Test Model: SYP4506 Rice popper

The SYP4506 model is a model that produces 45mm round rice cakes or chips. This model can produce 2,160-3,084 pcs rice cake per hour. It is most widely sold for chips using rice and corn.



1. Electric

Voltage : 220V 1phase

Cycles : 50-60Hz

Consumption : 3.5Kw Max

2. Heater Temperature : Max : Max : 400℃, Min : -1℃

3. Working Capacity : 6 pcs every 10 sec

4. Size of rice cake : 45mm Round, Thickness 2-8mm Approx.

5. Capacity : 2,160-3,084pcs / hour (2,160 pcs based on 10sec cycle)

6. Size & Weight : 575mm*510mm*1,490mm (Weight : 185kg Approx.)

7. Capacity of hopper : 8L(7kg of rice), 1 and half hour production

8. Remark

1) Operated by Hydraulic Cylinder

2) Controlled by Micro-controller

3) Material of grain touching parts are stainless steel (SUS304)

4) Mould is special alloy steel


For more information,

please check our website. Please contact us by e-mail.


Thank you.


email : newpop@newpop.co.kr / whatsapp:8210.9596.8210

16 views

Recent Posts

See All

Comments


bottom of page